|
HI-TECH LIMIT GAUGES ( '
TIECO ' BRAND ).
|
| SALIENT
FEATURES :
- Managed by progressive
management and handling highly qualified
and experienced staff and highly skilled operators, by
concentrating on high quality with accuracy.
- A well equipped standard
room with adequate facilities for Final Inspection.
- Machinery & Instruments
used are of highest Quality Standards Provides a guarantee
to the end products at 20º c with Test/Calibration certificate.
- Prompt deliveries and
a Customer Training cell to sort out queries & difficulties
- All gauges manufactured
out of best alloy steel viz. OHNS and EN-31, Hardened
to
58-60 HRC and duly sub-zero treated.
- Manufacturing a wide
range of Plain Limit gauges as per design and accuracies
stated in
the Indian Standards & also catering to custom built
design. Our gauges have not only
found nation wide acceptance for their Superior Quality
but also highly demanded in
up-country Markets, meeting their stringent Quality
Standards.
|
PLAIN PLUG GAUGES :
|
|
Application : To check
small and big bores
Range : 0.3 to 1000 mm.
Specifications : As per I.S. 3455-1971 B.S. 969-1963
|
PLAIN AND ADJUSTABLE SNAP
GAUGES
|
|
Application :
1) To check thickness and width.
2) To check OD.
3) To check groove diameter.
Available
in 2 Types-Single Ended & Double Ended also as per
customer design
|
KEY WAY WIDTH GAUGES
|
Application : To check groove diameter and width
Range : As per our standard 1 to 100 mm design and also custom built
|
TAPER GAUGES
TAPER PLUG & RING
GAUGES
Range : A 2 3, A 2 4, A 2 5, A 2 6 and A 2 8
Specifications : As per I.S. 2582 |
|
|
1) JACOB TAPER GAUGES
Application : To check
standard and Non-standard Tapers of bores and shafts.
Range : 6 to 80 mm
Specifications : As per I.S. 10649 - 1983
|
|
2) MORSE TAPER PLUGS & RINGS
Range : MT - 1 to MT - 6 Available with or without Tang
Specifications : I.S. 2251- 1986
3) ISO TAPER PLUGS & RINGS
Range : 30, 40, 45 & 50
Specifications : I.S. 9475 - 1986
|
SLIP GAUGES
|
|
Range : 1.00 to 300.00 mm
Specifications : I.S 2984- 1981 Workshop grade
|
BASE CIRCLE DISC
| Range : 15 to 250 mm OD. These can be made as per your drawing |
PLAIN & MASTER SETTING RINGS
PLAIN RING GAUGES
GO & NOGO RINGS
| Application : To check External dia. |
MASTER SETTING RINGS
Application : Master rings to set dial bore
gauges to the required size
Range : 3.00 to 525 mm
Specifications : As per I.S. 3485- 1983
Ring gauges are precision ground , lapped to high surface finish and calibrated at 200 C |
PLAIN SETTING MASTERS
Application :
(i) To set the dial comparator to the required size. This -eliminates the cost of Slip Gauges.
(ii) To set a Floating Carriage- diameter measuring machine while checking thread gauges. |
|
Range : 1 mm to 150 mm.
Specifications :
lapped to high surface finish and calibrated at 20'C.
Tolerance on diameter will be as per I.S. 4349 lapped to high surface finish and calibrated at 200 C |
PNEUMATICS GAUGES
| Pneumatics Plugs, Pneumatics Snap & Pneumatics Ring
Gauges & Setting Rings. |
Application :
They are used for checking bore & outer diameters very accurately. These are accessories to the pneumatic
gauging units. The process gives not only the actual size but also measures the taper and ovality. |
|
Range :
Air Plugs : 2.00 mm to 200 mm
Air Snap Gauges : 10 mm to 150 mm
Air Rings : 4.00 mm to 100 mm
|
SPECIAL GAUGES
|
These gauges are manufactured as per your diagrams & designs.
|
MEASURING
PINS AND PIN SETS
|
|
Application
:
1) To check small bore precisely.
2) To check center distance between two Holes.
3) To check slot width.
4) To check effective diameter of Threads.
5) To set size
on dia comparators.
6) To substitute GO and NO GO members
of plug gauges up to 20 MM.
Range : 0.100 to 25.00 mm
These pins are supplied in attractive wooden containers
in set of
0.01 mm, 0.02 mm, 0.05 mm & 0.10 mm. Loose pins can also be supplied
on request of any sizes in the above range. |
THREAD MEASURING
WIRES
|
|
Application :
To check effective diameter
of Thread Gauges, Taps and any other Threads. Our standard
set consists of following 16 sizes in mm.
Range :
0.17 mm to 3.2 mm.
The above set can be given in two wire
set and three wire set. Odd size in mm or inches also
can be supplied either in two wire or three wire sets. |
CALIBRATION SERVICES
|
|
JAYESH ENTERPRISES, offers Calibration Services for internal and external Linear Measurement
from 1.00 to 400.00 mm . We have the latest TRIMOS Computer aided Universal Metroscope Tulm- 210 ( 0.0001 mm resolution and 0.2 +/- 0.2s repeatability) . The Trimous Universal Metroscope is calibrated by the National Physical Laboratory, New Delhi. Traceability of Inspection Measuring and Test Equipment with national Physical Laboratory, New Delhi. Vide Cert. No. 8917/02/199/04 Dt 04/11/06 |
TREAD GRINDING & SUB- ZERO TREATMENT SERVICES
We offer external thread grinding on the Resihauer NRK Machine at the following specifications :
Dia : 3 mm to 200 mm
Length : 450 mm
Between Centers : 700 mm
"V" , Acme, Square, Butress thread forms Serrations Cutters, Thread Rolls, Grinding Wheel Crushers etc.
We also offer Sub- zero treatment at -70 to -850C |
DELIGHTED CUSTOMERS
| AMPHONEL |
HINDUSTAN AERONAUTICS LTD. |
| AUDCO |
HINDUSTAN MOTORS LIMITED |
| BAJAJ GROUP |
INDIAN SPACE RESEARCH ORGANISATION |
| BHARAT GEARS LIMITED |
PRICOL |
| CUMMINS INDIA LIMITED |
SIEMENS LIMITED |
| DELPHI- TV- DIESEL SYSTEMS LIMITED |
TATA MOTORS |
| EAGLE POONAWALA INDUSTRY LIMITED |
TVS GROUP |
| EL-O-MATIC (INDIA) PVT. LTD. |
4500 OTHERS & GLOBAL |
 .
|
