An ISO 9001:2008 Certified Company

PNEUMATIC PRESSURE GAUGING UNIT AND

PNEUMATIC PRESSURE GAUGING UNIT AND
PNEUMATIC GAUGES OR AIR GAUGES

Range:
Pneumatic Plug, Pneumatic Snap and Pneumatic Ring Gauges and Setting Rings.
Air Plugs: 2.00 mm to 200 mm
Air Rings: 4.00 mm to 100 mm


PNEUMATIC PRESSURE GAUGING UNIT



PNEUMATIC PRESSURE GAUGING UNIT

BASE CIRCLE DISC

Range: 15.00 to 250.00mm OD. These discs can be made as per customer drawing/requirements.

 

Special Gauges

These gauges are manufactured as per customer drawing/requirements. JE specialises in manufacture of such gauges.

Carbide Gauges

JE also manufactures plug and snap gauges in high quality tungsten carbide.

Plain Plug Gauges
Plain Plug Gauges

Range: 0.30 to 1000 mm. Fom 1000 - 2000mm available on request.
0.30 - 10.00mm - Reversible Pin Type Plug
10.01 - 40.00mm – Taper Lock Design IS 6137:1987
40.01 - 100.00mm – Disc Double Ended IS 6244:1980
100.01 - 300.00mm – Plate Type Plug S/E GO &
NOGO - Separate – JE Design
Above 300.01mm - Progressive Type – JE Design


   
 
Measuring Pins And Pin Sets

Range: 0.10 to 25.00 mm in steps of 0.01, 0.002 or 0.05mm
Loose pins of any size in the above range are available on request.
Specifications: IS 11103:1987


Measuring Pins And Pin Sets
   
Thread Measuring Wires
Thread Measuring Wires

Range
: 0.17 to 3.20 mm – 16 sizes, 0.17 to 6.35mm – 21 sizes
The above wires can be supplied in sets of two or three wires.
Odd size wires in inches or
millimetres can also be supplied either in sets of two or three wires.
The standard set consists of following 16 or 21 sizes in millimetres.
Specification: IS 6311:1978
   
Plain And Adjustable Snap Gauges

Range
: 2.50 to 100.00 mm. Above 100mm available on request.
Available in 2 Types – Single & Double Ended. Also manufactured
as per customer drawing/requirement.
Specifications: Single ended as per IS 8023:1991 and Double
Ended as per IS 4583:1968.
Plain And Adjustable Snap Gauges
   
Key Way Width Gauges
Key Way Width Gauges

Range: 1.00 to 100 mm
Specifications: As per JE design and standards or as per customer
drawings/requirements.
   
Plain Ring Gauges - Go & Nogo Rings

Range: 1.00 to 550.00mm
Specification: As per IS3485:1983. Above 315mm as per JE Design
Master Setting Rings

Range
: 1.00 to 550.00mm
Specifications: As per IS 3485:1983. Above 315mm as per JE Design


Plain Setting Masters

Range
: 1.00 mm to 300.00mm. Above 300mm available on request.
Specification: As per IS 4349:1987

Plain Setting Masters
   
Taper Gauge
Taper Gauge
Taper Gauge

Range :
1) ISO TAPER PLUGS & RINGS
Range: ISO 30, ISO 40, ISO 45 and ISO 50
Specifications: IS 9475:1986

2) MORSE TAPER PLUGS & RINGS
Range: MT 0 to MT 6
Available with or without Tang
Specifications: IS 2251:1986


3) JACOB TAPER GAUGES (PLUGS AND RINGS)
Range: JT0, JT1, JT2, JT3, JT6, JT(4), JT(5). JT33, JT2 (short)
Specifications: As per IS 10649:1983

4) TAPER PLUGS AND RINGS
Range: A 2 3, A 2 4, A 2 5, A 2 6, A 2 8, A2 11
Specifications: IS 2582:1972


 
Thread Gauges

Range
- ISO metric, Unified, Taper (Formally NPT and BSPT), BSW-BSF, B.S. Cycle, B.A.
screw and G series (Formally BSPF) thread gauges.
Thread gauges are available in both plugs (from diameter 1.60mm – 200.00mm) and ring types (from diameter 2.00mm – 200.00mm)
Specifications: The thread gauges are made in accordance with national and international standards such as ANSI, BS, IS, etc

Thread Gauges
Slip Gauges Or Gauge Blocks (Loose)

Range: 1.00 to 300.00 mm
Specifications: IS 2984- 2003 - Workshop grade